Frequently Asked Questions (Heating)
We have put together some of the most common questions when dealing with
heating systems.
It may be that you can resolve the problem yourself without having to call
out an engineer.
   
My pilot has gone out!
-
Refer to manufacturers re-lighting instructions, make sure the gas is on,
check external thermostats, e.g. room stat, if all above fails, an engineer
will be required
I have no hot water!
-
Make sure pilot on boiler is lit, check time clock, if all above fails, an
engineer will be required
I have banging in my pipes!
-
Turn off your central heating system, an engineer will be required for this
fault.
I have heating but no hot water!
-
Check time clock and check external stats, if all this fails, an engineer
will be required
I have hot water but no heating!
-
Check time clock and check external stats, if all this fails, an engineer
will be required
My overflow is discharging!
-
An engineer will be required
My combi boiler has no pressure!
-
Refer to manufactures instructions. Some manufacturers describe the
re-pressurising procedure, others specify a Corgi registered engineer is
required to re-pressurise the system.
My boiler's making a noise like a kettle!
-
Turn off your central heating system, and call for an engineer.
My boiler fan is making a noise!
-
An engineer will be required
My pump is noisy!
-
An engineer will be required
My water heater has stopped working!
-
As this may well be a problem with the pump its important that the first
thing you do is turn the power off, or you may well burn it out, as there
are high voltages associated with this part of the heating system it is not
recommended that you do any DIY investigating unless you really know what
you are doing
Your Heating System
If there is a problem with your heating system, Make sure that you know
where the drain-down cock is (it will usually be on a radiator on the ground
floor and/or on the boiler). If a heating pipe gets punctured or starts to
leak for any reason you may need to drain down the system (plumbers are not
always available at a moments notice!) Be sure to know sure to know how to
use the cock, you may need a length of hose to pipe water out of the house
(it will be more than a bucketful)
Preparations to make when an engineer is calling
Ensure that a full set of manufactures instructions are available for the
visiting engineer, (this is required by British Standards)
Make accurate notes regarding your fault or problem to speed up the
diagnosis
Locate any stop taps or valves that may be required to rectify the fault
|